technical data sheet adaptor rpc-2.92 plug C rpc-2.40 plug 02S109-S00S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fa x: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 1 / 2 rf_35/12.04/3.0 all dimensions are in mm; tolerances according to i so 2768 m-h interface rpc-2.92 according to iec 61169-35 rpc-2.92 mechanically compatible with rpc-3.50 and sma rpc-2.40 according to iec 61169-40 rpc-2.40 mechanically compatible with rpc-1.85 documents n/a material and plating connector parts material plating center contact cube gold, min. 1.27 m, over chemi cal nickel outer contact stainless steel passivated coupling nut stainless steel passivated dielectric ps gasket silicone
technical data sheet adaptor rpc-2.92 plug C rpc-2.40 plug 02S109-S00S3 rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18-0 page p.o.box 1260 d-84526 tittmoning germany fa x: +49 8684 18-499 www.rosenberger.de email: info@rosenberger.de 2 / 2 rf_35/12.04/3.0 f(ghz) electrical data impedance 50 w frequency dc to 40 ghz return loss 3 28 db, dc to 12 ghz 3 25 db, 12 ghz to 26.5 ghz 3 20 db, 26.5 ghz to 40 ghz insertion loss 0.05 x db insulation resistance 3 5 g w center contact resistance rpc-2.92 3.0 m w outer contact resistance rpc-2.92 2.0 m w center contact resistance rpc-2.40 4.0 m w outer contact resistance rpc-2.40 2.5 m w test voltage 500 v rms working voltage 150 v rms rf-leakage 3 100 db up to 1 ghz mechanical data mating cycles 3 500 center contact captivation 3 20 n coupling test torque rpc-2.92 1.70 nm recommended torque rpc-2.92 0.80 nm to 1.10 nm coupling test torque rpc-2.40 1.65 nm recommended torque rpc-2.40 0.80 nm to 1.10 nm environmental data temperature range -40c to +85c thermal shock mil-std-202, method 107, condition b corrosion mil-std-202, method 101, condition b vibration mil-std-202, method 204, condition d shock mil-std-202, method 213, condition i moisture resistance mil-std-202, method 106 rohs compliant tooling n/a suitable cables n/a packing weight 6.1 g/pce draft date approved date rev. engineering change n umber name date marek singer 03.02.12 martin moder 03.07.15 e00 15 -0846 a. youmsi mouafo 03.07.15 while the informati on has been carefully compiled to the best of our k nowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|